Sampling during discharge of domestic and industrial wastewater is very important for the accurate analysis results of the desired parameters to be measured.
Our automatic composite sampling devices are available in three different working methods.
1.Time-Controlled Water and Wastewater Sampling
Sampling water and wastewater with our automatic sampling devices is an extremely easy and reliable process thanks to its Turkish and easy-to-use menu. Both the time interval and the amount of sample to be taken can be set at the desired values. Once the time and quantity have been entered, the sampling process can be started immediately or by entering a specific start time.
2.Water and Wastewater Sampling Proportional to Flow
The MICROSAMPLER 10® sampler has a digital input. This input allows you to perform sampling with external control. For example, if a sample is to be taken proportional to wastewater, the pulse (digital contact) can be sampled based on the value measured by the wastewater flowmeter on the site. The sampling process begins with each incoming pulse. There is also the opportunity to put time in between if the impacts are too frequent. For example, if there is no flow, no sample is taken. However, when a pulse arrives, as if a sample is to be sampled once an hour, there will be a pick-up at these time intervals, and for frequent strokes every minute, the device may be asked to accept the second pick-up in the pulse after 60 minutes.
3.Single Water and Wastewater Sampling
The user may want to take a single sample of the moment, except as described above. Without the need to enter time, you can also choose the "Single" section from the menu and take a single sample by simply entering the amount you want to take.