Level Measurement in Solution Tanks

Solution tanks are also found extensively in production lines in the chemical industry. Depending on the process in which it will be used, weak or filled solutions can be produced. The temperature in the tank is usually around 90ºC with a continuously generated vapor.

MICROPULS 55 radar sensor is an ideal sensor, especially for non-contact measurement of aggressive liquids. The electronic amplifier is configured for difficult measuring conditions. Thanks to its PFA and PVDF antennas, it is resistant to aggressive substances such as acids and caustics, especially in difficult liquids. It is one of the most useful sensors that can measure up to 10m (Optional 20m and 30m) in all kinds of chemical mixtures and all similar liquids. It is especially preferred in small tanks due to the small area it occupies on the tank, the small dead measuring zone and the ease of installation.

MICROVIB 53 is a vibrating fork level circuit board used to protect against overflow and idle, especially in tanks and storage areas where liquid products are located. The vibrating level switch uses piezoelectric construction to ensure drive and sensing. The piezoelectric structure allows the tip fork of the sensor to vibrate at resonant frequency. Since the amplitude of the sensor's resonant frequency will decrease when the vibration fork is coated with material, the electronic module detects this change in amplitude and converts it into a switching output signal.

Advantages